Power Rule

using last state ,before boot stuff

Rule1 ON Power1#Boot=1 DO Power1 1 ENDON

Rule1 1

for later use state

Rule1 ON Power1#state=1 DO Power1 0 ENDON

or

Rule1 ON Power1#state=1 DO Publish stat/fan/BUTTON ON ENDON

Power1#Boot

Relay1 state before Wi-Fi and MQTT are connected and before Time sync but after PowerOnState is executed. Power#Boot triggers before System#Boot. This trigger's value will be the last state of Relay1 if PowerOnState is set to its default value (3).

Power1#State

when a power output is changed use Power1#state=0 and Power1#state=1 for comparison, not =off or =on Power2 for Relay2, etc.